Rapala BP706SH1 vs Bubba BB1-7F

Buy the Rapala Soft Grip fillet kit, model BP706SH1, UPC 022677030159, when you want the card that names a fillet knife, a single-stage sharpener, and a sheath, and when you will ignore a blade-length cell that says 1 feet on a size cell that says 6 in. Buy the Bubba 7 Inch Tapered Flex, model BB1-7F, when you want the red-gray knife the bullets call 13 inches overall with a 7-inch blade, and when you will ignore an item-length cell that also says 7 inches. These are cleaning knives. They are not the crankbait pair on the same desk.

Short version. A Shad Rap and a silent squarebill are hard baits, not blades. Two spinning rods put a fish on the stringer. Two 2500 spinning reels do the same job in the water. How a fillet stroke works is the technique. BP706SH1 and BB1-7F are the tools that stroke is supposed to use. Match the model before you match the word fillet.

The Rapala title on this card is a Soft Grip fillet knife sold with a single-stage sharpener and a sheath. The model cell and the part cell both read BP706SH1. The brand cell says Rapala. The UPC is 022677030159. The GTIN is 00022677030159, the same digits with a leading zero. The size cell says 6 in. The item-type line calls it a 6-inch blade with a black sheath. The blade-length cell says 1 feet. One foot is 12 inches. Six inches is half of that. Those two cells cannot both be the blade. Measure the steel you unpack. If the cutting edge is near 6 inches, the blade-length cell is the broken field. If the steel is near a foot, you did not receive the 6-inch kit this size cell describes.

The item-length cell says 7.48 inches. That number is closer to a whole knife, handle included, than to a 12-inch blade. It is also longer than the 6-inch size cell, which is what you would expect if size means the blade and item length means the whole tool. The card never says which cell is the blade and which is the overall. The 1-feet blade cell is the one that breaks the set. Do not average 12 inches and 6 inches into a 9-inch knife and then order a sheath for that average. Sheaths are cut for one blade.

The item-weight cell says 0.2 kg. Two tenths of a kilogram is about 7 ounces. The card does not print an ounce weight next to it, so do not convert it into a second official cell. A fillet knife, a sharpener, and a sheath in one mailer can land near that figure. A knife alone that weighs 0.2 kg is a heavier tool than a slim flexible blade usually is. Weigh the unpacked knife if the mailer weight is what you are trying to compare with Bubba's 9.6-ounce cell. The Rapala cell is the listing weight, not a promise that the bare blade is 7 ounces.

The number-of-items cell says 3. The unit-count cell says 1. The set name says Fillet Knife, Sharpener, Sheath (1 Piece). Three objects and one unit and a parenthetical one-piece set are three different counts. The included-components line is the sentence that settles the kit: fillet knife, sharpener, and sheath. Buy it as those three objects. Do not buy it as three knives. Do not buy it as a single knife with the sharpener and sheath treated as optional copy. The piece language is the conflict. The included line is the contents.

The recommended-uses cell says Carving. A fillet knife is a fish knife. Carving is a kitchen word for a roast. The card does not print a fish species, a fillet diagram, or a flexible-blade rating. Carving is what the marketplace filed. It is not a second blade. The handle-material cell says Stainless Steel. The feature language on the same card describes a soft-grip molded textured handle. Stainless steel is a blade metal, and it can be a guard metal. It is a strange material cell for a handle the copy calls soft grip. The blade-material cell says Alloy Steel. Alloy steel and stainless steel are not the same sentence. If the blade is alloy steel, the handle cell that says stainless steel is not describing the edge. If the blade is stainless, the blade-material cell is the one that is wrong. Look at the steel. Do not pick a corrosion story from the handle cell.

The color cell says Multi. A black sheath, a steel blade, and a molded handle will produce that word. Multi is not a second knife. The hand-orientation cell says Right Hand. A right-hand cell on a fillet knife usually means the edge and the guard were laid out for a right-handed stroke. It does not mean a left-handed angler cannot hold it. It does mean you should not assume the card called it ambidextrous. Bubba's card does say ambidextrous. This one does not. The blade-shape cell says Straight Back. A straight-back fillet blade is a long thin profile, not a clip point and not a trailing point. Bubba's card says Trailing Point. Those are different shape cells. The special-features cell says Manual. The power cell says hand_powered. A knife is manual. Those cells are not a motor and they are not a conflict with each other. The item-shape cell says Rectangular. A knife is not a rectangle. Rectangular is an empty marketplace shape. Ignore it. The care cell says Hand Wash Only. That is the cleaning instruction the card prints. It does not print a dishwasher permission, a sheath material, or a sharpener grit. The sharpener is named as single stage. Single stage is one grit, not a numbered stone. The card does not print the grit number.

The Bubba title is a 7 Inch Tapered Flex Fillet Fishing Knife, model BB1-7F. The brand cell says Bubba. The color cell says Red-Gray. The style cell says 7 Inch Tapered Flex. The bullets say the knife is 13 inches overall with a 7-inch blade, with a non-slip grip, with safety guards, and with 8Cr13MoV steel, and they point a one-year warranty at customerservice@bubbablade.com. The blade-length cell says 7 inches. That cell agrees with the title and with the bullet. The item-length cell also says 7 inches. Thirteen inches overall and 7 inches of item length cannot both be the whole knife. Seven inches of blade plus a handle is how you get a knife the bullet calls 13 inches overall. The item-length cell copied the blade. Measure overall length if you are fitting a tackle box. Use 7 inches for the blade, which is the cell, the title, and the bullet together. Use 13 inches only as the bullet's overall claim, and check it against the knife in your hand.

The size cell says 7". The item-weight cell says 9.6 ounces. The handle-material cell says Stainless Steel. The bullets say a non-slip grip. A red textured handle in the product photo is not a stainless-steel handle. Stainless steel on this card is the same mismatch the Rapala card makes, except Bubba's bullets are explicit about the grip. The blade edge cell says V-Grind. The blade-type cell says straight edge. A V grind is how the bevels meet. A straight edge is the profile of the cutting line, not a serration. Those two cells can both be true. They are not a length. The hand-orientation cell says Ambidextrous. That is the contrast with Rapala's Right Hand cell. The blade-shape cell says Trailing Point. A trailing point puts the tip above the spine line. A straight back does not. If you want the tip low and the back straight, this shape cell is the wrong knife even when the 7-inch blade cell is the length you wanted.

The included-components cell on the Bubba card says Sheath only. The title is a knife. A sheath-only included line is a marketplace field that forgot the knife or that described the extra, not the product. Do not order BB1-7F expecting an empty sheath. Do not order it expecting a sharpener. The Rapala kit names the sharpener. This card does not. The number-of-items cell says 1. That agrees with one knife. It does not agree with a reading of "sheath only" as the thing in the box. The customer-package-type cell says FFP. FFP is a package code, not a blade steel and not a flex rating. The special-features cell says Stainless Steel. The bullets name 8Cr13MoV, which is a specific alloy. Stainless steel as a special feature is the vague cell. 8Cr13MoV is the bullet. Do not paste a titanium-nitride or Teflon coating from a different Bubba listing onto BB1-7F. This card does not print those coatings.

Two UPC strings appear on the Bubba card: 661120077343 and 794504877731. The GTIN is 00794504877731, which matches the second UPC with a leading zero. It does not match 661120077343. Two barcodes on one listing are a reorder hazard. Scan the knife you receive. If the sheath or the hang card carries 661120077343, you are holding the other code this page also prints. If it carries 794504877731, you are holding the code the GTIN repeats. The Rapala card has one UPC. That is the cleaner reorder string: 022677030159.

Who should buy the Rapala kit, and who should buy the Bubba?

Buy BP706SH1 if you want a 6-inch Rapala fillet knife and you also want the single-stage sharpener and the sheath in the same shipment. Buy it if you will ignore a blade-length cell that says 1 feet, a recommended-use cell that says Carving, a handle cell that says stainless steel on a soft-grip knife, and a count that says both 3 and 1. Buy it if a right-hand orientation cell is acceptable. Buy BB1-7F if you want the red-gray 7-inch tapered flex and you will ignore an item-length cell that repeats 7 inches against a 13-inch overall bullet, a handle cell that says stainless steel against a non-slip grip bullet, and an included line that says sheath only. Buy it if you want the ambidextrous cell and the trailing-point cell, and if you already have a way to sharpen the edge. This card does not include the sharpener the Rapala card names.

Do not buy the Rapala because the blade cell said one foot and you wanted a long slicer. Do not buy the Bubba because you wanted a three-piece kit. Do not buy either card as a camping knife, a hunting knife, or a kitchen carving set. The Rapala use cell says carving. The product is still filed and titled as a fillet knife. A carving knife with a wide heel is a different tool. Do not buy a second copy to fix a count cell. One order of BP706SH1 is the kit the included line names. One order of BB1-7F is one knife.

What BP706SH1 is actually for

This card is a fish-cleaning kit in a marketplace record that cannot decide how long the blade is. The useful identity is the model BP706SH1, the UPC 022677030159, the 6-inch size cell, and the included list of knife, sharpener, and sheath. The 1-feet blade cell is the warning. The 7.48-inch item length is the overall figure you can test with a tape. The 0.2 kg weight is the listing weight, not a blade spec. Multi is the color of a kit that is more than one object. Right Hand is the orientation cell. Straight Back is the shape cell. Alloy Steel is the blade-material cell. Manual and hand powered are the same fact in two fields. Rectangular is noise. Hand Wash Only is the care line.

Use the sharpener that ships in the kit if you ordered this model for that reason. The card calls it single stage. It does not name a grit, a stone size, or a brand of stone separate from Rapala. A single-stage sharpener is a pull-through or a one-angle tool, not a progression of stones. If the sharpener is missing, the included line was the promise and the shipment failed it. If a third object you did not expect is in the bag, check it against knife, sharpener, and sheath before you decide the number-of-items cell meant three knives. The sheath is black on the item-type line. A sheath that does not cover the edge is not the sheath this card is selling, whatever the color cell's word Multi suggests.

What BB1-7F is actually for

This card is one tapered flex fillet knife. The useful identity is the model BB1-7F, the 7-inch blade cell, the red-gray color cell, the 8Cr13MoV bullet, and the GTIN that matches UPC 794504877731. The 13-inch overall claim lives in the bullets, not in the item-length cell. The 9.6-ounce weight is the cell you can cite. The non-slip grip and the safety guards live in the bullets. The handle-material cell that says stainless steel does not describe that grip. The trailing-point shape and the ambidextrous orientation are cells. The V grind and the straight edge can both be true. The sheath is what the included line names, and the knife is what the title names. Believe both are supposed to arrive, and treat "sheath only" as the broken field.

Flex on a fillet knife is the blade bending through a cut, not a hinge and not a folding lock. The card does not print a flex angle or a spine thickness. Tapered is the title's word for the blade getting thinner toward the tip. The card does not print a thickness at the heel and a thickness at the tip, so tapered remains a title word until you look at the steel. The one-year warranty bullet gives an email address. It does not print a phone number, a registration card, or a list of what the year covers. A chipped tip and a dull edge are different claims. The card does not say which one the year includes. The small guards the bullets mention are there to keep a wet hand from sliding onto the edge. They are not a full crossguard like a camp knife. Do not read safety guards as a promise that the knife cannot cut the hand that is holding the fish.

How to use them without mixing the two cards

A fillet stroke runs the edge along the backbone and then over the ribs. The 6-inch size cell and the 7-inch blade cell are close. One inch of blade changes how much steel is in the cut and how much handle you have left when the tip is at the tail. It does not change the stroke. What changes the stroke is the shape cell. A straight back and a trailing point meet the rib cage differently. If you learned the stroke on a straight-back knife, do not assume the trailing-point tip will track the same line on the first fish. If you learned it on a flex blade, a stiffer 6-inch knife will ask for more of the cut to come from your wrist. The card does not print a stiffness number for either knife. Flex is in the Bubba title. It is not in the Rapala title.

Wash both by hand. The Rapala card says Hand Wash Only. The Bubba card does not print a care cell you can quote as dishwasher-safe, so do not invent one. Dry the edge before the sheath. A wet flexible blade in a tight sheath is how a thin tip rusts even when a special-features cell says stainless. The Rapala sharpener is for the Rapala edge. The card does not say it matches the Bubba bevel. A V grind and a single-stage pull-through are not automatically the same angle. If you use the Rapala sharpener on BB1-7F, you are experimenting. The cards do not authorize that experiment. Keep both knives away from a bait board that is also a food board until you have washed them. Carving in the Rapala use cell is not a reason to slice a roast with a fish knife that still smells like the last walleye.

What actually fails on these two cards

The Rapala card fails when a shopper orders a foot-long blade because the blade-length cell says 1 feet. It fails when Carving sends the order to a kitchen-knife buyer. It fails when stainless steel as the handle material is read as a full-tang stainless handle and the soft-grip bullet is ignored. It fails when unit count 1 is read as one object and the sharpener never gets unpacked. It fails when number of items 3 is read as three knives. It fails when Multi is read as a multi-pack of knives. It fails when Right Hand is ignored by a left-handed buyer who needed the ambidextrous cell and only saw the word fillet.

The Bubba card fails when 7 inches of item length is copied as the overall length and the 13-inch bullet is ignored, or the other way around, when 13 inches is copied as the blade. It fails when the included line "sheath only" is obeyed and the buyer thinks the knife is missing from the title on purpose. It fails when the second UPC, 661120077343, is reordered and a different Bubba card arrives. It fails when a coating from a sibling listing is expected on this steel. It fails when the handle cell's stainless steel is used to reject a red grip that the color cell and the bullets already described. It fails when FFP is read as a steel grade. It is a package type.

What this comparison is not

This is not a claim about which knife fillets a walleye faster. Neither card prints a cut time. This is not a review of every Rapala fillet length. BP706SH1 is the soft-grip kit with UPC 022677030159. A different Rapala blade length is a different model. This is not a review of every Bubba flex length. BB1-7F is the 7-inch tapered flex on this card. A longer Bubba is a different model and a different overall bullet. This is not a price quote. The price changes. Use the buttons if you want the live listing. This is not a crankbait article, a rod article, or a reel article. Those links are the other tools on a fishing day. This is not a coating comparison, because this Bubba card does not print the coating a different Bubba card prints.

So which fillet knife should you buy?

Buy the Rapala if you want model BP706SH1, UPC 022677030159, the 6-inch size cell, and the knife-plus-sharpener-plus-sheath included line, and if you will throw out the 1-feet blade cell, the carving use cell, and the stainless handle cell. Buy the Bubba if you want model BB1-7F, the 7-inch blade cell, the red-gray color, the 8Cr13MoV bullet, and the GTIN that matches 794504877731, and if you will throw out the 7-inch item-length cell, the sheath-only included line, and the stainless handle cell. Buy neither if you wanted a foot-long slicer, a three-knife set, or a coated blade this card never named. The model stamp is the decision. The cells are the warnings.

The No-Eye-Deer film, "Bubba Fillet Knife Review – Is It Worth It?," shows a Bubba fillet knife. The title does not name model BB1-7F. The clip does not show the Rapala BP706SH1 kit, the sharpener, or the black sheath from that card. Use it for the Bubba handle shape and a fillet knife in a hand. Do not use it as a measurement of the 1-feet cell or of UPC 022677030159.